Sok-Lok Shoe Covers are available in three versions with the following specifications:


Material: Polypropylene Styrene Butadiene Styrene (PP + SBS)

Hardness 56ShoreA

Tensile Strength 37MPa

Elongation at Break 600%

Specific Gravity 1.03

Abrasion Resistance: Good

Anti-Slip coefficient: High

Recyclability: 100%

Usage Temperature -50C to +60C (+90C for short periods)


Material: As Standard (above) with a conductive additive. (Additive not carbon based)

Physical Properties: As Standard (above).

Electrical Properties: Resistance to ground < 3.5x107 Ohms

As required by EN 100015-1

Note: Electrical properties are factory checked for each individual shoe cover, user should ensure that the tape is in secure contact with skin/tights (or similar) at all times.


Material: As Standard (above) with a chemical, anti-bacterial additive

Physical Properties: As Standard (above).


Chemical Properties: Significant inhibition of Staphylococcus aureus ATCC 6538 &

Escherichia coli NCTC 8196.

(Independent test data available by request)